Recent Posts

Wednesday, April 28, 2010

DIY Classy Corkboard

Loved this DIY Corkboard that Bryn Alexandra recently posted.  This will be a DIY in the new house.

One of my local clients and new friend Sarah asked me if I could do something similar to Erika's fabulous inspiration board:



And I said, sure I can!

The process was actually much simpler than I thought and it turned out really nice.

The materials involved are:

Corkboard (we used a 3' x 4' from Staples)
Fabric (we used ivory linen)
Nailheads (we used these)
Hammer
Spray Adhesive
Staple gun
Iron

Steps:

1. Iron your fabric like crazy to get all the wrinkles out (especially if using linen)
2. Spray adhesive the fabric onto the cork section of the board only, leaving the moulding trim unglued.
3. Nail in the nailheads with the hammer- I measured the width between the nailheads with the width of my pinkie finger. This was easy and assured that everything was even :) Go along the line of the board's moulding trim and you will get a straight line.
4. Spray adhesive the fabric onto the moulding
5. Staple gun the fabric onto the back of the board and you're done!

I didn't take pictures of the entire process.. I grabbed my iPhone mid-way through to snap a few pictures. I'm really bad about taking pictures for my DIY projects... I know, I need to work on that. Bad blogger!





[It never fails. When you have a black dog, there will always be black dog hair in my pictures.]



The finished product!


Yes, I am aware of the terrible picture quality. But I got a promise from Sarah to get pictures of it hung :) I'll be sure to share with you when I get them!

0 comments:

Post a Comment